Linksys app for routers come with QoS features which you can use to distribute internet speed to connected devices.

Cisco Systems is an international brand of America and is excelling in the field of Software, networking Hardware, telecommunications, IT equipment, and other technology products and services. It is operating through its headquarter in California in the heart of Silicon Valley. Cisco is amongst the largest manufacturer of routers, switches, wireless systems, WAN acceleration hardware, energy and building management products, etc.

In the current scenario, Cisco is clearing the entire bar over the wireless router and yielding the field of connectivity. It has recently created a device with the name of Linksys smart wifi router, model number EA6500 and a compatible universal media connector with the name of LinksysE4200. Moreover, the Linksys app for pc has designed and launched so many such routers that are glittering into your house around every corner of the world.

Productivity features of Linksys routers

 The Linksys EA6500 router is carrying six internal 3D antennas for fixing on the walls or the surface. It bis compatible with existing wireless devices with 802.11a/b/g/n, to make it possible for you to link your wifi router with the legacy of wifi networks.  Many of the manufacturers have been inspired to introduce such devices which can support 802.11ac technology. All these newly interviewed products are very stylish and smart that anyone can be lost in its productivity.

Configuring the Linksys smart wifi through smart setup Wizard

By using a smart setup wizard, you can quickly configure your Linksys smart wifi router. This setup wizard is embedded in its default firmware and is always available even without having an internet connection.

First Step: - Connect the antennas to the router, If the router has an external antenna,

Second Step: - Switch on the power of your router as well as of your main power supply.

Third Step: - Have patience till the solid lit of power light of your router and the modem that is connected with the Ethernet port and Internet.

Fourth Step: - After connecting to your wifi, locate the credentials which will be available at the back of the router or in the quick guide.

Fifth Step: - This step is not useful for wired connections, so you can skip it. Launch a web browser of your choice and type extender.linksys.com then enter.

After accepting the license terms and conditions click next and again next buttons to proceed with your router. Save the innovations made by you.

Configuring the Linksys smart wifi through CableInternet service

First Step: - In the beginning, connect your Ethernet cable from the device, whichever you will be using that moment.

Second Step: - Plugin your power adapter o0f the wifi router, to the electrical power board and make sure that the current will be flowing stably.

Third Step: - Follow the instructions given in your Linksys smart router's manual.

Fourth Step: - To get connected with your router, click on to 'Connectivity'.

Fifth Step: - As you are done with all the above-mentioned steps then click on to the Internet setting tab.

 SixthStep: - Go to the Enabledbox and Click at the tab of Clone My PC's MAC then click the 'Apply Tab' situated at the right corner of the displayed page.

Seventh Step: - To connect with the modem from the internet port your Linksys router just click on the 'OK' tab.

After following all these steps your internet connections will be ok and active now.

Configuring the Linksys smart wifi through static IP account and Linksys cloud account

An IP address is an internet protocol address that is a unique identifier of your internet service network. It consists of 0 to 255 numbers, all are distinguished by three dots and is required in all the devices that are connected to the internet. Let us proceed towards the configuration of the router with the help of this IP address.

First Step: - Before moving towards the settings, obtain a few necessary pieces of information from your ISP, like Internet IP address, Subnet mask, default gateway, and Domain Name Server.

Second Step: - Attach your modem to the internet port of your beloved Linksys wi-fi router.

Third Step: - Take an Ethernet cable and connect one of its end to your computer and the other end to your router.

Fourth Step: - To make the power light solid, connect your power adapter to an electric socket board and into the Linksys Smart Wifi as well.

Fifth Step: - Open a web browser for Linksys extender login and enter '192.168.1.1' in the addy then press the Enter tab.

Sixth Step: - Enter your default password of the router that is 'Admin' in the required field when prompted to do so for login.

Seventh Step: - Click in important terms and conditioning box to continue after receiving the message"The router is not Set up." and then continue.

Eighth Step: - Click the connectivity option to go to the Internet Settings and as you reach there, click Edit just next to the option of Type of Internet connection

Ninth Step: - Choose the type of the static IP address that your router will be having and enter the necessary information, given by your internet service provider. Just after that click the 'APPLY' tab at the lower side of the page.

Tenth Step: - After clicking the OK tab, power off your router for 30 seconds. Once the router is on, click YES to go ahead for making an association with your router to the Linksys cloud account.

For the further technical support and inquiries call at 1800 836 3164 (toll-free) or you can contact us with the paraphrase linksyssmartwifi.com setup

YOUR REACTION?


You may also like

Facebook Conversations